5ml HDPE Extrusion Blow Molding Machine MP55D for Potion Bottle
Introduction:
MP55D is specifically designed for making bottles from 5ml up to maximum 1L. It is hydraulic driven with accrate eletrical control system. MP55D has double stations to increase the production efficiency. Also, it has variety of choice of die heads. With more than 10 years of success in the market, MP55D is updated to be one of the most reliable and popular model in the world.
Advantages:
EXTRUSION DIE HEAD: HIGHLY EXPERIENCED MULTI-CAVITY AND MULTI-LAYER TECHNOLOGY
Adopting with latest die head design, MEPER focuses on providing high quality and high precision self-manufactured extrusion die heads for customers.
Semiautomatic: Push “ Semiautomatic” key and make machine to conduct reset adjustment. Blow pin returns to position of back pen stop, placing rack returns to position of down stop and mould clamping device returns to position of mould opening stop. After these action, close safety door. The machine will automatically finish one working cycle according to procedure of “Action Order Figure”. When action approaches end, safety door opens and take out product. Close safety door again and next action cycle begins.
During semiautomatic operation, products’ quality and production efficiency are directly influenced by position selection of all stroke switches, setting of all time and selection switches of procedure modes.
Specifications:
| MP55D |
| Double station blow molder with horizontal linear mould shuttle |
| | | |
| | Length: | 2870mm |
| | Width: | 2140mm |
| | Height: | 2280mm |
| | | |
| Key Data | | MP55D | | |
| | | mm | | |
| Linear mould stroke | A | 380 |  |
| Mould Width | B | 360 |
| Mould Length | C | 300 |
| Mould Thickness | D | 130 |
| Opening Stroke | E | 220 |
| | | | |
| Platen Daylight | D+E | 350 | | |
| Clamping Force | | 30kN | | |
| Centre Distance | 2x2 fold | 130 | | |
| | 2x3 fold | 90 | | |
| | 2x4 fold | 75 | | |
| | 2x5 fold | 60 | | |
| | 2x6 fold | 50 | | |
| | | | | |
| Extruder | | φ55 | φ60 | φ65 |
| Screw Speed | r/min | 0~65 | 0~65 | 0~65 |
| Screw Diameter | mm | 55 | 60 | 65 |
| Screw L/D Ratio | L/D | 24 | 24 | 24 |
| | | | | |
| Energy Requirements | | | | |
| Extruder Inverter Power | kW | 11 | 15 | 18.5 |
| Extruder Moter Power | kW | 11 | 15 | 18.5 |
| Srew Heating Power | kW | 5.85 | 9.4 | 12.3 |
| Fan Power | kW | 0.14X2 | 0.14X2 | 0.14X2 |
| Oil pump Motor Power | kW | 7.5 | 7.5 | 7.5 |
| Total Power of Machine | kW | 33.34 | 40.92 | 47.29 |
| Air Requirement approx | m3/min | 0.8-1 | 0.8-1 | 0.8-1 |
| Air Working Pressure | Mpa | 0.6-0.8 | 0.6-0.8 | 0.6-0.8 |
| | | | | |
| Cooling Requirements | | | | |
| Consumption Cooling Water | L/min | 30 | 30 | 30 |
Product Tags:
|
|
5ml Potion Bottle HDPE Extrusion Blow Molding Machine 5 Cavities Images
|
