2ML HDPE Extrusion Blow Molding Machine MP55D for Eye Drop Bottle
Introduction:
MP55D is specifically designed for making bottles from 5ml up to maximum 1L. It is hydraulic driven with accrate eletrical control system. MP55D has double stations to increase the production efficiency. Also, it has variety of choice of die heads. With more than 10 years of success in the market, MP55D is updated to be one of the most reliable and popular model in the world.
Advantages:
EXTRUSION DIE HEAD: HIGHLY EXPERIENCED MULTI-CAVITY AND MULTI-LAYER TECHNOLOGY
Adopting with latest die head design, MEPER focuses on providing high quality and high precision self-manufactured extrusion die heads for customers.
CONTROL SYSTEM: HIGHLY OPTIMIZED USER-FRIENDLY CONTROL TECHNOLOGY
All MEPER machines is equipped in standard with easy operational TECHMATION control system or optional with B&R control system. MOOG Parison Control is also optional based on different requirements.
cylinder of die head ,please be according to chapter one’s figure to change parts and all seal rings
Step:1. using professional wrench remover guidance tape, then take out piston rod, change broken parts. After finishing, put the piston rod back, put guidance tape. Please add lubricating oil when parts put into together
how to change die head, please see easy figure , firstly remove flange of die head’s heat components and lines, then unscrew the nuts between barrel and flange. Because the length of nut is too long, when u remove please firstly remove the front of barrel’s stainless heater.
Note: if the temperature is very high, screw part must put grease. Otherwise will obstruct.
Specifications:
| MP55D |
| Double station blow molder with horizontal linear mould shuttle |
| | | |
| | Length: | 2870mm |
| | Width: | 2140mm |
| | Height: | 2280mm |
| | | |
| Key Data | | MP55D | | |
| | | mm | | |
| Linear mould stroke | A | 380 |  |
| Mould Width | B | 360 |
| Mould Length | C | 300 |
| Mould Thickness | D | 130 |
| Opening Stroke | E | 220 |
| | | | |
| Platen Daylight | D+E | 350 | | |
| Clamping Force | | 30kN | | |
| Centre Distance | 2x2 fold | 130 | | |
| | 2x3 fold | 90 | | |
| | 2x4 fold | 75 | | |
| | 2x5 fold | 60 | | |
| | 2x6 fold | 50 | | |
| | | | | |
| Extruder | | φ55 | φ60 | φ65 |
| Screw Speed | r/min | 0~65 | 0~65 | 0~65 |
| Screw Diameter | mm | 55 | 60 | 65 |
| Screw L/D Ratio | L/D | 24 | 24 | 24 |
| | | | | |
| Energy Requirements | | | | |
| Extruder Inverter Power | kW | 11 | 15 | 18.5 |
| Extruder Moter Power | kW | 11 | 15 | 18.5 |
| Srew Heating Power | kW | 5.85 | 9.4 | 12.3 |
| Fan Power | kW | 0.14X2 | 0.14X2 | 0.14X2 |
| Oil pump Motor Power | kW | 7.5 | 7.5 | 7.5 |
| Total Power of Machine | kW | 33.34 | 40.92 | 47.29 |
| Air Requirement approx | m3/min | 0.8-1 | 0.8-1 | 0.8-1 |
| Air Working Pressure | Mpa | 0.6-0.8 | 0.6-0.8 | 0.6-0.8 |
| | | | | |
| Cooling Requirements | | | | |
| Consumption Cooling Water | L/min | 30 | 30 | 30 |
Product Tags:
|
|
2ML HDPE Extrusion Blow Molding Machine MP55D For Eye Drop Bottle Images
|
